BBR9 | RCA Remote
RRP £69.99
Our price
£49.99
Specs
| Frequency Response: | 20Hz-20 000Hz |
| Signal to Noise Ratio: | 95 dB |
| Input Sensitivity: | 6~0.2 V |
| Output voltage: | 0.2-9 Volt |
| Bass Boost | 0-18dB |
| Boost freq | 45Hz-120Hz |
Quota | 1,000w Mono Block
RRP £299.99
Our price
£209.99
All good things comes in small packages!
It pretty much sums up the features of the Quota. With a sleek design & a tiny footprint, this HI-EF class D amplifier will be able to slide into nearly any place. Even though the dimension of the amplifier can cause limitations, no features are cut. The variable bass boost & adjustable bass frequency will add that "punch" you are looking for & with 1000 watts spread over a 10"x2"x8.6" heatsink, good things really comes in small quantities!
Specs
| Frequency Response: | 15 Hz ~ 280 Hz |
| Signal to Noise Ratio: | 90 dB |
| Input Sensitivity: | 6~0.2 V |
| Crossover: | 12 dB/Oct |
| Low Pass Filter: | 35 Hz ~ 250 Hz |
| Subsonic Filter: | 35 Hz |
| Bass Boost: | 0 ~ 9 dB |
| Variable Bass Boost Range | 35 Hz ~ 100 Hz |
| Damping Factor: | 250< |
| Power Terminal gauge: | 4 GA x 1 |
| Fuse Rating: | 90 A |
| Power @ 4 Ohm: | 1 x 400 watts |
| Power @ 2 Ohm: | 1 x 650 watts |
| Power @ 1 Ohm: | 1 x 1000 watts |
| (14,4V < 1% TH.D.) |
Quattro | 1,000w 4 channel class A/B
RRP £669.99
Our price
£429.99
The perfect partner. Versatile, powerful, accurate, complete.
Adjectives well fitted for the Quattro 4 channel class A/B amplifier. By using a High Current configuration we've managed to fit all of those features into the sleek & compact design of the Quattro. Its identical dimensions to the Mono makes it an obvious choice if you need something for your full ranges.
But don't let its compact dimensions fool you. With nearly 1000 continuous class A/B watts, it is powerful enough for a loud single amplifier setup, handling both subwoofers & component kits with precision. Oversized 0 GA power terminals will feed the amplifier with what's needed. 24 dB/Octave filters with an ample frequency range ensures optimum fine tuning for the audiophile.
In addition the Quattro is ideal for a 2 way active front system. Enabling you to enjoy improved sound quality in comparison to the standard provided crossovers of most component kits.
Specs
| Frequency Response: | 20 Hz ~ 30 KHz |
| Signal to Noise Ratio: | 105 dB |
| Input Sensitivity: | 6~0.2 V |
| Crossover: | 24 dB/Oct |
| High Pass Filter: | 20(200)Hz ~ 500(5K)Hz, x1, (x10) |
| Low Pass Filter | 50(500)Hz ~ 500(5K)Hz, x1, x10) |
| Damping Factor: | 600< |
| Power Terminal gauge: | 0 GA x 1 |
| Fuse Rating: | 30 A x 3 |
| Power @ 4 Ohm: | 2 x 110 + 2 x 225 watts |
| Power @ 2 Ohm: | 2 x 165 + 2 x 310 watts |
| Power @ 1 Ohm: | 1 x 330 + 1 x 620 watts |
Duo | 1,200w 2 channel class A/B
RRP £799.99
Our price
£549.99
The Duo is the dawn of a new area. This 2 ch class A/B amplifier had to be unique and excessive. Not only in its massive power output, which is on par with large class D amps, but even in its ability to please the audiophile listeners. A S/N ratio of 105 dB coupled with a wide frequency response, will entartain you beyond the human hearing range.
No matter which frequency it amplifies, the Duo will never loose its grasp of the music. Filters with broad crossover points, matched with vast amplification levels will control tweeters / mids / subwoofers with accuracy.
The Duo will never sound breathless given the right conditions. Remember power is nothing without control. This amp will rival the output and sonic abilities of many larger 3kw Class D operation amplifiers!
Specs
| Frequency Response: | 10 Hz ~ 40 KHz |
| Signal to Noise Ratio: | 105 dB |
| Input Sensitivity: | 6~0.2 V |
| Crossover: | 18 dB/Oct |
| High Pass Filter: | 20(200)Hz ~ 500(5K)Hz, x1, (x10) |
| Low Pass Filter: | 50(500)Hz ~ 500(5K)Hz, x1, (x10) |
| Subsonic Filter: | 10 Hz ~ 50 Hz |
| Bass Boost: | 0 ~18 dB |
| Variable Bass Boost Range | 35 Hz ~ 120 Hz |
| Damping Factor: | 600< |
| Power Terminal gauge: | 0 GA x 1 |
| Fuse Rating: | 350 A |
| Power @ 4 Ohm: | 2 x 600 watts |
| Power @ 2 Ohm: | 2 x 900 watts |
| Power @ 1 Ohm: | 2 x 1200 watts |
| Bridged Power @ 4 Ohm: | 1 x 1800 watts |
| Bridged Power @ 2 Ohm: | 1 x 2400 watts |
Mono MKII | 2,200w Mono Block
RRP £699.99
Our price
£449.99
"Size matters" a term know very well.
The sleek design of the Mono is more than just appealing, it is an exact match in dimensions to the Quattro 4 ch amplifier which also has 0 GA power terminals. Although small details, they are well thought through. Giving our customers the possibility of keeping their installation clean & simple, if preferred.
The HI-EF class D circuit configuration ensures stability into 1 ohm loads & 2200 watts is at your service. In case that isn't enough, simply link it with another Mono & double the power output to 4.4 Kw in 2 ohm.
The Mono's high damping factor, related to its class D design, surely benefits the way the sound is reproduced. Lack of control is not an option here, but this is just one of the cornerstones that makes the Mono suitable in any set-up, whether it's sound quality or SPL.
Specs
| Frequency Response: | 10 Hz ~ 250 Hz |
| Signal to Noise Ratio: | 100 dB |
| Input Sensitivity: | 6~0.2 V |
| Crossover: | 24 dB/Oct |
| Low Pass Filter: | 35 Hz ~ 250 Hz |
| Subsonic Filter: | 10 Hz ~ 50 Hz |
| Bass Boost: | 0 ~ 9 dB |
| Variable Bass Boost Range | 0 ~ 180 degrees |
| Damping Factor: | 300< |
| Power Terminal gauge: | 0 GA x 1 |
| Fuse Rating: | 200 A |
| Power @ 4 Ohm: | 1 x 700 watts |
| Power @ 2 Ohm: | 1 x 1300 watts |
| Power @ 1 Ohm: | 1 x 2200 watts |
M1S | 5,000w Mono Block
RRP £1799.00
Our price £999.99
Carcharodon carchariashe, the great white....
Only now in a smaller dimension M1s Some say that sharks are perfect creatures. Although more compact than the M1 MKII, its substantial dimensions & white colour aren't the only factors shared.
Strength is surely a key factor. With the introduction of the M1s we've focused on making a daily driver version of the M1 MKII. Increasing its efficiency at 10~12 V while limiting the voltage to 16 V, allowed us to make the M1s more compact.
Having the success of the M1 MKII in mind, we know expectations are high for the M1s.
*In order to get the full power output of the amplifier, it is crucial that your electrical system is correctly (over)dimensioned. Failure to upgrading, will constrain the power output & lower the efficiency which can cause damage to the amplifier & void the warranty.
Specs
| Frequency Response: | 10 Hz ~ 350 Hz |
| Signal to Noise Ratio: | 100 dB |
| Input Sensitivity: | 6~0.2 V |
| Crossover: | 24 dB/Oct |
| Low Pass Filter: | 35 Hz ~ 250 Hz |
| Subsonic Filter: | 10Hz ~ 50Hz |
| Bass Boost: | 0 ~ 9 dB |
| Variable Bass Boost Range | 30 ~ 90 Hz |
| Phase: | 0 ~ 180 Hz |
| Damping Factor: | 250< |
| Power Terminal gauge: | 0 GA x 2 |
| Fuse Rating: | 650 A |
| Power @ 1 Ohm: | 1 x 3,500* |
| Power @ 2 Ohm: | 1 x 7,000 Linked |
| (10V) |
|
| Power @ 1 Ohm: | 1 x 5,000 |
| Power @ 2 Ohm: | 1 x 10,000 Linked |
SERUM 7K | 7,500w Mono Block
RRP £1999
Our price
£1249.99
A specially commissioned amplifier for Blade ICE celebrating there 10th year anniversary. This amp will cover you through your progression in High-end and extreme auto audio applications. With working ranges from 12V right upto 18V this power house will meet the requirements no matter what your working voltage is.
The SERUM 7K will produce a true 6500 wrms output @ 12.5v under 1% T.H.D. what happens after that can be seen in the specs below!
*In order to get the full power output of the amplifier, it is crucial that your electrical system is correctly (over)dimensioned. Failure to upgrading, will constrain the power output & lower the efficiency which can cause damage to the amplifier & void the warranty.
Specs
| Frequency Response: | 20 Hz ~ 250 Hz |
| Signal to Noise Ratio: | 100 dB |
| Input Sensitivity: | 6~0.2 V |
| Crossover: | 24 dB/Oct |
| Low Pass Filter: | 35 Hz ~ 250 Hz |
| Subsonic Filter: | 10Hz ~ 50Hz |
| Bass Boost: | 0 ~ 9 dB |
| Variable Bass Boost Range | 30 ~ 90 Hz |
| Phase: | 0 ~ 180 Hz |
| Damping Factor: | 300< |
| Power Terminal gauge: | 0 GA x 2 |
| Fuse Rating: | 750 A |
| Power @ 1 Ohm: | 1 x 8,500* |
| Power @ 2 Ohm: | 1 x 4,800 |
| Power @ 2 Ohm: |
1 x 2,600 |
| (14.4V) | |
| Power @ 1 Ohm: | 1 x 9,100* |
| Power @ 2 Ohm: | 1 x 5,800 |
| Power @ 4 Ohm: |
1 x 3,300 |
| (16V) | |
| Power @ 1 Ohm: | 1 x 9,500* |
| Power @ 2 Ohm: | 1 x 6,900 |
| Power @ 4 Ohm: |
1 x 4,000 |
| (18V) |
M1 MKII | 10,000w Mono Block
RRP £2399
Our price
£1499.99
Following on from the M1s comes the monstrous M1 version 2.
Its enormous power output & the stability it was served with, made it possible to push boundaries in the competition area within SPL & Bass Race. Taking both World Championships in Bass Race & World Records along with National Championships in SPL.
After setting new standards in dB drag racing in 2009/10, we started working on a possible upgrade. If it isn't broken, don't fix it. Meaning we nearly started from scratch when planning the upgrade. Our aim was even higher efficiency, more power & increased stability, while compact size had to be obtained as well. We adjusted the operating voltage to 9~16V, which increased the performance on the cost of 18V operation.
*In order to get the full power output of the amplifier, it is crucial that your electrical system is correctly (over)dimensioned. Failure to upgrading, will constrain the power output & lower the efficiency which can cause damage to the amplifier & void the warranty.
Specs
| Frequency Response: | 15 Hz ~ 250 Hz |
| Signal to Noise Ratio: | 100 dB |
| Input Sensitivity: | 6 ~ 0.2 V |
| Crossover: | 24 dB/Oct |
| Low Pass Filter: | 35Hz ~ 250Hz |
| Subsonic Filter: | 10Hz ~ 50Hz |
| Bass Boost: | 0 ~ 9 dB |
| Phase: | 0 ~ 180 Hz |
| Damping Factor: | 300< |
| Power Terminal gauge: | 0 GA x 3 |
| Fuse Rating: | 850 A |
| Power @ 1 Ohm: | 1 x 6,500* |
| Power @ 2 Ohm: | 1 x 3,700 |
| Power @ 2 Ohm Linked | 1 x 13,000 |
| (12V) |
|
| Power @ 1 Ohm: | 1 x 9,900* |
| Power @ 2 Ohm: | 1 x 5,300 |
| Power @ 2 Ohm Linked | 1 x 19,800 |
| (14.4V) |
|
| Power @ 1 Ohm: | 1 x 11,500* |
| Power @ 2 Ohm: | 1 x 6,300 |
| Power @ 2 Ohm Linked | 1 x 23,000 |
| (16V) |
Blade ICE - Distribution
Current Time
|
Payment Types
