More than enough may be known for some, but for those who want it all for less, the entire SLD lineup will have you fully covered.
The SLD5K offers all the features of our revered Zero and M – series, but in a sleaker heatsink.
More than 5000 watts of dynamic power supplied by the 8 precision handwound transformers, will never disappoint any sound system and you will #B2Loud.
The high end RCA connectors & the EZ bridge function just makes things better, if you intend to run an extra amplifier and get well over 10.000 watts.
|12V <1% THD||14.4V <1% THD||16V <1% THD||18v <1% THD|
|Power @ 4 Ω:||1 x 750 w||1 x 1250 w||1 x 1300 w||1 x 1325 w|
|Power @ 2 Ω:||1 x 1500 w||1 x 2500 w||1 x 2600 w||1 x 2650 w|
|Power @ 1 Ω:||1 x 2500 w||1 x 5000 w||1 x 5200 w||1 x 5300 w|
|Frequency Response:||10 Hz ~ 250 Hz|
|Signal to Noise Ratio:||100 dB|
|Input Sensitivity:||6 ~ 0.2 V|
|Crossover:||24 dB / Oct|
|Low Pass Filter:||35 Hz ~ 250 Hz|
|Subsonic Filter:||10 Hz ~ 50 Hz|
|Bass Boost:||0 ~ 9 dB|
|Bass Boost Frequency:||30 Hz – 90 Hz|
|Phase:||0 ~ 180°|
|Power Terminal gauge:||0 GA x 2|
|Fuse Rating:||500 A|
|Operational voltage:||12 V ~ 18 V|
|Dimensions:||9.84″ x 2.28″ x 25.59″|
*In order to get the full power output of the amplifier, it is crucial that your electical system is correctly
(over)dimensioned. Failure to upgrading, will constrain the power output & lower the effeciency which can cause damage to the amplifier & void the warranty, this also includes loads below min. of what is written in the manual. Read the manual thoroughly before installing!(Drop – Dynamic Rated Output Power).