1x HN15v3 Dual 2 ohm subwoofer and 1x MA2000.1 Monoblock for 1 Ohm amp operation (2000wrms)
Product specs below
MA2000.1 Mean Mono
The new MA series, available in both 4ch, 2ch and 1ch are already groud breakers.
The MA2000.1 is no exception. Offering all the features you would expect to see in higher end amplifiers, but the MA2000.1 does it with tiny dimensions. It is still a big amplifier, but the narrow width and small height, makes it ideal to do stealth installs with. Which would be a shame, given that all the MA series have backlit logos and terminals with LED.
2000.1 equals the max output at 1 ohm on 1 channel. With 2000 watts, the MA2000.1 will have no problem taking on any of our subwoofers up to the XM series.
16.53″ x 6.9″ x 1.96″ / 42 x 17.5 x 5 cm is all it takes to accomodate such power. A high efficiency circuit allows for the smaller and sleek heatsink design, thus you won’t be hassled about not having sufficient space. The «ACCU8» crossovers gives you the ability to fine tune your amp like a pro. 41 clicks, each with corresponding frequencies per click, takes away the doubt of where exactly the low pass or the subsonic is set.Product Manual
MA 2000.1 Monoblock Specification
|Power @ 4 Ω:||1 x 750 w|
|Power @ 2 Ω:||1 x 1300 w|
|Power @ 1 Ω:||1 x 2000 w|
|Frequency Response:||15 Hz ~ 180 KHz (+/- 1 dB)|
|Signal to Noise Ratio:||90 dB|
|Input Sensitivity:||4 ~ 0.2 V|
|Crossover:||12 dB / Oct|
|Low Pass Filter:||40 Hz ~ 180 Hz|
|Subsonic Filter:||15 Hz ~ 50 Hz|
|Bass Boost:||0 ~ 12 dB|
|Bass Boost Frequency:||30 Hz ~ 80 Hz|
|Phase:||0 ~ 180°|
|Power Terminal gauge:||0 GA x 1|
|Fuse Rating:||200 A|
|Operational voltage:||10 V ~ 15 V|
|Dimensions:||16.53″ x 6.9″ x 1.96″ 42 x 17.5 x 5 cm|
The NEW HNv3 15″ the master of disguise, but also the versatile series. Daily Driver, SQL & Competition, all of those summed up would define the HN subwoofers. These are the subwoofers that will allow for a multitude of applications while focusing on increased performance overall.
Double stacked slugs with a high temp. 3″ voice coil configuration with massive 10″ spiders. The surrounds are developed for added excursion & greater sd & are implemented throughout the whole HN series. To keep things under control the HN uses multilayer spiders with woven in tinsels & as a bonus, the oversized push terminals from the XC was inherited.
A redesigned AFS (Air Flow System) enables enhanced cooling through the basket & also on the pole piece.
Summed up, it’s sweet in more than one dimension.Product Manual
HN15v3 D2 Specification
|HN15v3 Dual 2|
|Power Handling:||1500 wrms|
|Nominal Impedance:||Dual 2 Ω|
|DC Resistance (Re):||1.9 Ω|
|Resonanse Frequency (Fs):||28.7 Hz|
|Voice Coil diameter:||3″|