2x RAGE15″ Dual 4 ohm subwoofer and 1x RAGE2500.1 Monoblock for 1 Ohm amp operation (2500wrms)
Product specs below
RAGE AMPLIFIERS – INCREASED FORCE
Expanding our R line, The RAGE is now complemented with 3 new amplifiers. Each of these unique to their own, a 2.5 KW mono, the RAGE1200.6 – a 6 channel asymmetrical compact amp & the even smaller RAGE600.4 – 600 watt 4 channel, which is narrower than a 1$ bill. These new designs & their small footprints leaves nothing spared. In fact, they have inherited features from the M and Zero series amplifiers. Low voltage indicators & clip sensors, on either the amp or the bass remote, is another new trait added to the Rage amplifiers.
The first mono in the RAGE series is more of all. Surpassing the discontinued MA2000.1, The RAGE2500.1 has 25% more power at 1 ohm. The heatsink is slightly narrower, but a bit wider, housing the rugged quad core power supply. With twice as many cores, the amplifier is more efficient and will handle better on less input. Sufficient battery power is still essential, that’s why the Bass remote now comes with both clip and low voltage indicators. If 2500 watts isn’t enough, then you can strap it with another amplifier. 2 amplifiers will work as one and 5000 watts is able to power any subwoofer(s) from B2 audio. The RAGE / RAGE XL and even the RAMPAGE subwoofers performs beyond expectations when paired with the RAGE2500.1.
The ACCU8 crossovers can be found on both the subsonic and the low pass. A nice touch we continued from the MA series is the red backlit power terminals on the RAGE amplifiers
|Power @ 4 Ω:||1 x 750 w|
|Power @ 2 Ω:||1x 1500 w|
|Power @ 1 Ω bridge:||1x 2500 w|
|Frequency Response:||15 Hz ~ 200 Hz (+/- 1 dB)|
|Input Sensitivity:||4 ~ 0.1 V|
|Crossover:||24 dB / Oct|
|Low Pass Filter:||20 Hz ~ 200 Hz|
|Bass Boost Frequency:||45 Hz / 0 ~ 9 dB|
|Power Terminal gauge:||0 GA x 1|
|Fuse Rating:||250 A|
|Operational voltage:||9 V ~ 16 V|
|Dimensions:||11.7″ x 7.3″ x 2.1″ (45 x 18.5 x 5.4 cm)|
At times you need to exaggerate to make a point. These new subwoofers with their unique design and features doesn’t need to capture the trend, the RAGE sets the trend.
Positioned above the RIOT & below the XL subwoofers, the 1200 watt rating makes it great for intermediate setups.
Available in 12″ and 15″ & in both dual 2 and dual 4 ohm they offer flexible wiring. A perfect fit for a MA1200 or even a multiple setup with the MA6000 amplifier. For the 12″ model we chose an entirely new platform. The custom tooled basket offers superior stability & linear excursion, even when pushed to the limit.
All the subwoofers have oversized dual tinsel leads on a 10″ progressive spider. The triple slug motor design offers plenty of ventilation for the 3″ voice coil. Implementing features of the XL series such as ventilated pole piece, XD (cross drilled pole) flow and 8 flared additional vents shows the abilities of the RAGE.
|Specification||RAGE15 Dual 4|
|Power Handling:||1200 wrms|
|Nominal Impedance:||Dual 4 Ω|
|Xmax: 1 way||20mm|
|DC Resistance (Re):||3.2 Ω|
|Resonanse Frequency (Fs):||35.5Hz|
|Voice Coil diameter:||3″|