Fi Car Audio NEO 4.x Series Subwoofer

Neo4.7:
Comparable to SP4 and BTL4 series drivers. Solid 4″ workhorse subs that work well in just about any application. Standard 3 spider suspension. 3500W. 12″, 15″, and 18″ sizes.

Neo4.9:
Comparable to SP4+ or Team series drivers depending on coil option. Comes with standard 4″ 4 layer and 4 spiders with the option for the Plus 4″ coils, with extra spider and gap option. 4 spider on standard and 5 spider on Team coil. Works well in ported, 4th or 6th order applications. 3500W-4500W depending on the coil and cool/IND options. 12″, 15″, 18″ and 21″ sizes.

Neo4.11:
The midpoint between the Delta and Omega lines: Comes with standard 4″ 4 layer and 4 spiders with the options for the Plus 4″ coils, extra spider, and gap option. Designed for modern monster applications in ported, 4th or 6th order high-pressure systems. 3500-many Watts depending on the coil and cool/IND options. 12″, 15″, 18″ and 21″ sizes.

New cooling and inductance features that are set up in stages. The first stage is a machined aluminum pole sleeve. This provides better heat wicking and is the first portion of inductance linearizing and reduction. The second stage is a combination of the pole sleeve and an aluminum domed compression cap. This increases the compression ratio for cooling as well as adds some outstroke inductance reduction. The third stage utilizes the pole sleeve, the compression cap, and a thick aluminum finned extrustion that again lowers and linearizes inductance as well as aids in thermal dissipation. With the third stage we have reduced inductance by almost a factor of 3 over utilizing none of the aluminum.

All leads are stitched in the same pattern and use the bolted terminal block as the original hybrid design. But we have added push terminals that use this same setup with the ability to handle much larger wire and completely removing the multiple solder and crimp points that could introduce unwanted resistance.

All Neo4.X subs use the high Xmax dual 1 Ohm and dual 2 Ohm coils for 33mm of one way Xmax.

NEW! Option
Need more motor force and efficiency from a lighter package? Opting for Fi Car Audios Black Neo will up your lower line driver to the next series up in motor force, but keep the lighter series weight.
Need more motor force for crushing lows and compression fighting in the gap Gauss? Opting for Fi Car Audios Black Neo will take your N3.9 or N4.11 to the next level. Generating more motor force than previously available with the standard high temp Neo, you can gain 10-20% more Gauss without having to go to a simply massive motor.

Dual 1 and Dual 2 Ohm
Extra heavy aluminum basket
Wrap around gasket
Kraft pulp fiber reinforced cone
Dual layer wide foam surround
Standard heavy duty stitched hybrid lead or push/hybrid termination
144 tinsel count leads
FEA optimized motor design
2750W on up depending on options
Ultra Flux density design
4” diameter 4 layer coil
Open column motor design for increased cooling
Standard or heavy duty coils available
N52UH Neo magnets (7,9, or 11)
Carbon cap standard
Extra heavy lead wire
Water jet and machined in house from US steel
10″ Progressive spiders (options for 2-6 depending on series)
3 stage inductance and cooling options
6″ Gloss Carbon dustcap

NEO 4.7 SPECS

NEO 4.7 Thiele-Small Parameters

Thiele-Small Parameters

	NEO4.7 12	NEO4.7 15	NEO4.7 18
Coils	DUAL 1 | DUAL 2	DUAL 1 | DUAL 2	DUAL 1 | DUAL 2
FS	32.8 Hz	30.4 Hz	29.1 Hz
RE	0.7 | 1.4	0.7 | 1.4	0.7 | 1.4
QMS	6.62	6.93	7.61
QES	0.45	0.48	0.53
QTS	0.42	0.44	0.50
MMS	367g	402g	484g
CMS	N/A	N/A	N/A
SD	480cm^2	810cm^2	1210cm^2
VAS	20.70 l	59.05 l	126.58 l
SPL	83.9dB	87.6	89.5dB
BL	15.27 N/A | 21.6 N/A	15.27 N/A | 21.6 N/A	15.27 N/A | 21.6 N/A
XMAX	34mm (One Way)	34mm (One Way)	34mm (One Way)
RMS	3500W	3500W	3500W

Technical Specifications

	NEO4.7 12	NEO4.7 15	NEO4.7 18
Overall Diameter	12.500”	15.625”	18.500”
Cutout Diameter	11.125”	14.125”	16.750”
Mounting Depth	10.00”	11.00”	12.250”
Driver Displacement	0.19cuft	0.21cuft	0.26cuft
Ported Box	1.8-2.5 cuft	3-5 cuft	5-8 cuft

NEO 4.9 SPECS

NEO 4.9 Thiele-Small Parameters

Thiele-Small Parameters

	NEO4.9 12	NEO4.9 15	NEO4.9 18	NEO4.9 21
Coils	DUAL 1 | DUAL 2	DUAL 1 | DUAL 2	DUAL 1 | DUAL 2	DUAL 1 | DUAL 2
FS	34.2 Hz	32.0 Hz	31.7 Hz	00.0 Hz
RE	0.7 | 1.4	0.7 | 1.4	0.7 | 1.4	0.7 | 1.4
QMS	6.51	7.39	8.21	0.00
QES	0.37	0.39	0.45	0.00
QTS	0.35	0.37	0.42	0.00
MMS	368g	419g	489g	000.0g
CMS	N/A	N/A	N/A	N/A
SD	480cm^2	810cm^2	1210cm^2	1650cm^2
VAS	19.3 l	55.2 l	111.3 l	000.0 l
SPL	85.2dB	88.7dB	90.4dB	00.0dB
BL	17.6 N/A | 24.9 N/A	17.6 N/A | 24.9N/A	17.6 N/A | 24.9 N/A	17.6 N/A | 24.9 N/A
XMAX	34mm (One Way)	34mm (One Way)	34mm (One Way)	34mm (One Way)
RMS	3500-4500W *	3500-4500W *	3500-4500W *	3500-4500W *

Technical Specifications

	NEO4.9 12	NEO4.9 15	NEO4.9 18	NEO4.9 21
Overall Diameter	12.500”	15.625”	18.500”	21.625″
Cutout Diameter	11.125”	14.125”	16.750”	19.250″
Mounting Depth	10.00”	11.00”	12.250”	11.750″
Driver Displacement	0.19cuft	0.21cuft	0.26cuft	0.33cuft
Ported Box	1.8-2.5 cuft	3-5 cuft	5-8 cuft	7-10 cuft

NEO 4.11 SPECS

NEO 4.11 Thiele-Small Parameters

Thiele-Small Parameters

	NEO4.11 12	NEO4.11 15	NEO4.11 18	NEO4.11 21
Coils	DUAL 1 | DUAL 2	DUAL 1 | DUAL 2	DUAL 1 | DUAL 2	DUAL 1 | DUAL 2
FS	36.1 Hz	33.6 Hz	33.4	31.4
RE	0.7 | 1.4	0.7 | 1.4	0.7 | 1.4	0.7 | 1.4
QMS	6.83	7.31	8.44	9.36
QES	0.28	0.30	0.35	0.43
QTS	0.27	0.29	0.33	0.41
MMS	381g	420g	489g	639g
CMS	N/A	N/A	N/A	N/A
SD	480cm^2	810cm^2	1210cm^2	1650cm^2
VAS	17.1 l	48.8 l	95.1 l	153.6 l
SPL	86.4dB	89.7dB	91.9dB	92.3dB
BL	20.4 N/A | 28.7N/A	20.4 N/A | 28.7 N/A	20.4 N/A | 28.7 N/A	20.4 N/A | 28.7 N/A
XMAX	34mm (One Way)	34mm (One Way)	34mm (One Way)	34mm (One Way)
RMS	3500-4500W+	3500-4500W+	3500-4500W+	3500-4500W+

Technical Specifications

	NEO4.11 12	NEO4.11 15	NEO4.11 18	NEO4.11 21
Overall Diameter	12.500”	15.625”	18.500”	21.625”
Cutout Diameter	11.125”	14.125”	16.750”	19.250”
Mounting Depth	10.00”	11.00”	12.250”	11.750”
Driver Displacement	0.19cuft	0.21cuft	0.26cuft	0.34cuft
Ported Box	1.8-2.5 cuft	3-5 cuft	5-8 cuft	7-10 cuft

Fi Options Explained

This is a complete list of options; not all options are available on all models.
See drop down selections for options available with each speaker model.

Cooling Stage: The new cooling stages are aluminum rings or plugs that aid in cooling and reducing the inductance of a coil (as well as linearizing it to further reduce distortion). The first stage is a machined aluminum sleeve over the pole. This has better thermal conductivity than steel alone does and reduces the effect of the coils inductance increase being an iron core inductor. The second stage includes the first pole sleeve and adds an aluminum pole cap that increases compression and cooling. The third is the first two stages along with the large visible heatsink that surrounds the outside of the coil and transfers heat to the ambient environment as well as greatly reducing the inward inductance of the coil. The overall effect increases cooling/thermal capacity as well as linearizing in vs outward inductance shift reducing distortion ad increasing bandwidth

Cooling: Self explanatory, the cooling channels are machined into the inside of the sub to help cool the coil FAR better. This option is available for subs that do not have staged cooling. While it is not a visible option, it makes a huge difference in long term thermal capacity.

High QTS: This option is for users who intend on using the subwoofer in only a sealed enclosure.

Low QTS: This option is for users who intend on using the subwoofer in only ported enclosures.

Extra Spider: This option adds an additional spider to the spider pack to help with mechanical power handling and keeping the moving assembly under control. It can have small detrimental effects on the sound quality of the sub if the sub is made too stiff (reducing excursion ability and low frequency bandwidth). But in some applications the losses are offset by the ability to use extra power. An extra spider is not a bandaid for improper subsonic filter settings on your amp/DS with respect to the box tuning (should be 2-3 Hz lower than box tuning to avoid mechanical issues when the port unloads).

Internal Lead: This option is for 8 lead per coil, increasing the current flow from coil to terminals. It is sandwiched between the spiders to keep it linear and from flopping around under extreme excursion.

Plus Coil Pack: This option adds an extra spider and the larger/higher power handling Omega/TeamV3 coil. This well bump thermal capacity from 3500W to 4500W or more depending on other options and application. The extra spider helps keep the additional moving mass and power under control while the coil has much higher current carrying capacity over the standard 4″ coils.

Speaker Terminals

We have two terminal options on selected subwoofers.

Our Standard Push terminal using 144 strand count sewn tinsel leads Or our new Hybrid+ lead system with ring terminal attachment for high power systems.

“Fi Terms & Conditions”

These are not mass produced items. Each and every order is built from the ground up. This is not by using pre made parts and bolting/gluing them together, far from. They are machined to exact tolerance for your given application. There is no mass produced magnet sitting on the shelf, your woofer is made for you, when you order. Sure others can produce drivers faster but our manufacturing goes much deeper giving greater control during manufacturing resulting in a ultra high performance regardless of the footprint.

As a result build time is typically 10-14 days. With the distance from USA to the UK this can be anywhere from 14-28 days till you receive your Fi subwoofer.

We can offer a faster service with additional freight charge to express. Typically 7 days. Please contact us about this before ordering.

Refunds, If your custom-built-item has not yet begun to be manufactured you will be charged a 5% processing fee for refunding your payment. If your speaker has begun to be manufactured, or is finished, but has not shipped, you will be charged a 30% refund fee. If the speaker has already shipped, you will be charged the 30% refund fee plus all applicable return shipping costs.

By reading these terms and conditions, you agree to wait upto the allotted 28 day period. If your order exceeds this due to manufacturing delay or part shortage you will be notified in good time.

If you have anymore questions do not hesitate in contacting us.

Weight	20 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

UK Delivery

All items ordered before 14.00pm are shipped the same day unless otherwise stated at the time of ordering. Orders placed after 14.00pm on a Friday will be shipped the following Monday (excluding bank holidays, in which case it will be the next working day). If the item is out of stock for whatever reason you will be emailed within 24hrs to inform you of this. Our site manages stock inventory so if it says ‘IN STOCK’ that means goods are available for immediate dispatch.

If an item shows the logo as ‘Next Day Delivery*’ this means the item is available for immediate dispatch for a next day service. If your complete order is not over £50 then the order will be sent on a Royal Mail service. If its over then it will be sent with the most economical next day service. If you are unclear then please contact us.

• Shipping will be calculated at the checkout.
• Free shipping available for customers in the UK mainland ONLY when orders are over £50.
• We use DPD for all UK next day deliveries (aswell as for orders over £50 if the weight exceeds 2kg) and Royal Mail Recorded Post for orders under 2kg.

Make sure you supply us with a mobile number when you order, then we can give you full tracking information & updates on your order throughout the process.

Clicking on the above image, will also allow you to track your order online. If you have any questions or queries, contact our helpful office team on sales@bladeice.com

Free Delivery

Free delivery is available to UK mainland addresses ONLY and excludes addresses in the Scottish Highlands & Islands and Northern Ireland. Free delivery is applicable to orders over £50.00 (inc vat) ONLY. This offer doesn’t necessarily mean your goods will be sent on a courier next day service. However assuming the weight exceeds 2kg your goods are usually sent via courier (DPD Local).

Guranteed 24 Hour

• Next Day Delivery - Over £50 Inc. VAT - Any weight - Free!
• Next Day Delivery - 2-5KG - £8.00
• Next Day Delivery - 5-20KG - £9.99
• Next Day Delivery - 20-30KG - £11.99
• Next Day Delivery - 30-40KG - £15.00
• Next Day Delivery - 45KG+ - £50.00

Economy

• Royal Mail 1st Class Recorded 1-3 working days - Upto 1KG - £4.45
• Royal Mail 1st Class Recorded 1-3 working days - Upto 1-2KG - £6.90
• Royal Mail 2nd Class Recorded 2-5 working days - 0-2KG - £3.95

Saturday

• Royal Mail Special Delivery Saturday - Upto 2KG - £14.00
• Courier Saturday - Upto 5KG - £15.95
• Courier Saturday - 5-20KG - £19.95
• Courier Saturday - 20-25KG - £22.95

Orders MUST be made before 2pm Friday

Back Order

Items that are listed with ‘Back order’ usually means there is around a 5-10 working day delay for the item to be back in stock. Some items are listed in this way as they are a low volume product and are considered special order with our suppliers.

European & International Delivery

Blade ICE ships internationally to many countries in Europe. Based on the weight of your order shipping will be calculated at the checkout.

PLEASE NOTE

Blade ICE reserves the right to charge the full shipping fee applicable to resend if the item is returned to us as the customer was unable to take delivery of the parcel for any reason. Courier returned items will be added back into our stock and your account credited with the order total, minus the fee the courier charges us to deliver the item back to us. You will have to re-place the order to have the item reshipped. If a customer inputs any incorrect details on their order, which causes the parcel to be delivered incorrectly, we will not hold any responsibility for this parcel.

Finally we advise you to check the contents of the order with the inventory sent with the goods. In the rare instance that goods are missing, please contact us within 24 hours and we will happily send out the missing goods at no extra cost to you. If goods are damaged or faulty please inform us within 3 working days of receiving your order.

Please refer to our Terms and Conditions for more information.