Bassik – simple, clean, easy. This is the foundation of what KnuKonceptz calls Bassik. Easy to install, simple to connect and cost effective! The BK-1024 accepts 0 or 4 gauge in and 4 or 8 gauge power wire out without the use of adapters. Oversized allen screws can secure either gauge without any modification or additional parts to complicate the design.
The BK-1024 fuse block has a single oval input which can accommodate either 4 or 1/0 as the main input gauge. Each output is fused by a Mini-ANL style fuse with a max load of 150A per circuit.
Dimensions L x W x H: 2.35″ x 1.73″ x 1.11″
Total Ports: 3
Inputs: 0-4 Gauge x 1
Ouputs: 4-8 Gauge x 2
Fuse Type: Mini-ANL (AFC)
Fuse Count: 2 Max Load: 150A x 2
Finish: Satin Nickel
How do I determine what size fuses I need for this fuse block?
Each output of a fuse distribution block normally is connected to a single amplifier. Each amplifier will have either a fuse on board or the manufacture will state within the manual’s installation guide or spec sheet what the max fuse rating or current draw of the amplifier is. If your amp has three 30A fuses on boards, you want a 100A fuse for that particular output of this block (90A is not an option we offer). If the second amp has a single 40A fuse, then a 40A fuse goes into that output of the block and thus a 100A and 40A would be required.
Can I use this block as a ground block?
Yes, KnuKonceptz offers ground links to turn this block into a 2 Way Ground Block. These Mini-ANL buss bars replace the fuse and allow the BK-1024 to be used from a common grounding point.
There are no reviews yet.